How to Fix an iPhone X at Microsoldering in Rawalpindi

If your iPhone X has suddenly stopped working, won’t charge, has a cracked screen, has water damage, or has Face ID or logic board issues, getting the right repair is essential. Many hardware faults require advanced diagnostics and microsoldering techniques rather than simply replacing parts. Choosing a professional repair service can extend your device’s lifespan and save you the cost of purchasing a new phone.

At Microsoldering Repairs, we specialize in professional iPhone X diagnostics and component-level repairs for customers in Rawalpindi and Islamabad. Our experienced technicians use advanced repair equipment to identify the exact cause of the problem before recommending the most effective solution. Whether your iPhone X needs a simple screen replacement or a complex motherboard repair, our goal is to restore your device safely and efficiently.

Shop Address:
1st Floor, Shabaz Plaza, Bank Road, Saddar, Rawalpindi

Contact: 03108999929

Why the iPhone X Needs Professional Repairs

The iPhone X introduced several advanced technologies, including an OLED display, Face ID, wireless charging, and a dual-layer logic board. These innovations make the device powerful but also more challenging to repair than earlier iPhone models.

Many problems that appear to be simple, such as random restarts or charging failures, may actually be caused by damaged motherboard circuits, faulty ICs, or microscopic solder joint failures. Attempting DIY repairs without the right tools can worsen the damage and increase repair costs.

Professional technicians perform detailed diagnostics to determine whether the issue is related to hardware, software, or board-level components before replacing any parts.

Common iPhone X Problems We Repair

The iPhone X can develop several issues over time due to accidental drops, water exposure, battery wear, or normal daily use. Some of the most common problems include:

• Cracked or shattered OLED screen
• Touchscreen not responding
• Green lines on the display
• Black screen, but phone still vibrates
• Battery draining quickly
• iPhone not charging
• Charging port damaged
• Boot loop or Apple logo stuck
• Water damage
• Face ID is not working
• Rear or front camera problems
• Speaker or microphone failure
• Wi-Fi or Bluetooth connectivity issues
• Logic board faults
• No network or SIM detection issues

Every repair begins with a full diagnostic inspection to identify the exact source of the problem.

Our Professional Diagnostic Process

Before replacing any component, our technicians perform a comprehensive inspection to ensure the correct repair is carried out. This process helps avoid unnecessary part replacements and reduces repair costs.

Our diagnostic process includes:

• External physical inspection
• Display and touch functionality testing
• Battery health analysis
• Charging current measurement
• Motherboard voltage testing
• Microscope inspection
• Water damage assessment
• Camera testing
• Audio testing
• Network signal analysis
• Face ID diagnostics
• Software evaluation

This detailed assessment allows us to determine whether your iPhone X requires component replacement, software restoration, or advanced microsoldering repair.

Use an image here showing a technician inspecting an iPhone X motherboard under a microscope.

iPhone X Screen Repair

One of the most common repairs for the iPhone X is screen replacement. Because the device uses an advanced OLED display, physical damage can affect both the image quality and touch functionality.

Common screen issues include:

• Broken glass
• Flickering display
• Dead pixels
• Green vertical lines
• Black screen
• Ghost touch
• Unresponsive touchscreen
• Display separation

Replacing the screen with a high-quality compatible display helps restore the phone’s original appearance and performance. During installation, technicians also inspect the display connectors and flex cables for hidden damage that could cause future issues.

Battery Replacement for iPhone X

Lithium-ion batteries naturally degrade after hundreds of charging cycles. As the battery ages, users may notice reduced battery life, unexpected shutdowns, overheating, or slow performance.

Signs that your battery may need replacement include:

• The battery drains rapidly
• Phone switches off unexpectedly
• Battery health is below 80%
• The device becomes hot during charging
• Slow performance
• Battery swelling
• Charging percentage fluctuates

A professional battery replacement restores reliable performance and improves daily usability.

Charging Problems and Charging Port Issues

Many users assume their battery is faulty when their phone refuses to charge. In reality, the issue may be caused by debris in the charging port, damaged charging pins, faulty charging ICs, or motherboard faults.

Symptoms include:

• The charging cable feels loose
• Slow charging
• No charging response
• Accessory not supported message
• Intermittent charging
• The device only charges at certain angles

Our technicians inspect both the charging port and internal charging circuits before replacing any components.

Water Damage Repair

Water exposure is one of the leading causes of iPhone X failures. Even if the phone appears to function normally after getting wet, corrosion can develop over time and damage sensitive motherboard components.

Immediate steps after water exposure include:

• Power off the device.
• Do not attempt to charge it.
• Avoid using a hair dryer or heating device.
• Do not place the phone in rice, as this does not remove internal moisture.
• Bring the device in for professional cleaning and diagnostics as soon as possible.

Using ultrasonic cleaning equipment and specialized tools, technicians remove corrosion and inspect damaged circuits to prevent further failures.

Logic Board Repairs Using Microsoldering

Not all iPhone X issues can be resolved by replacing external components. Many problems originate on the logic board, where tiny integrated circuits and microscopic solder connections control the phone’s essential functions.

Microsoldering is a highly specialized repair technique used to restore damaged motherboard components rather than replace the entire board. This approach can often recover devices that would otherwise be considered beyond repair.

Common board-level issues include:

• No power
• No charging
• Boot looping
• Audio IC faults
• Power management IC failures
• Backlight issues
• Wi-Fi IC damage
• Charging IC faults
• Baseband problems
• Data recovery from damaged devices

Professional microsoldering requires precision equipment, high-powered microscopes, and extensive technical expertise to safely repair delicate circuits.

Serving Rawalpindi & Islamabad

If you’re searching for How To Fix an iPhone X at Microsoldering in Rawalpindi or Islamabad, Microsoldering Repairs provides professional diagnostics and repair solutions for a wide range of iPhone X hardware and software issues.

Visit us at:

Microsoldering Repairs
1st Floor, Shabaz Plaza, Bank Road, Saddar, Rawalpindi

Call or WhatsApp: 03108999929

Face ID Repair for iPhone X

Face ID is one of the standout features of the iPhone X, providing secure authentication for unlocking the device, making payments, and accessing sensitive apps. However, because the TrueDepth camera system consists of several interconnected components, even a minor drop or exposure to water can cause Face ID to stop working.

Common Face ID problems include:

• Face ID is unavailable.
• Unable to activate Face ID.
• Face ID setup fails.
• Dot projector damage.
• Flood illuminator issues.
• Front camera not functioning.
• Face recognition is slow or inconsistent.
• Face ID stops working after a screen replacement.

Professional technicians begin by diagnosing whether the front camera assembly, flex cables, sensors, or logic board circuits cause the fault. Since many Face ID components are uniquely paired with the motherboard, repairing the original hardware is often the safest way to restore functionality.

Rear Camera Repair

The dual-camera system on the iPhone X delivers excellent image quality, but accidental drops and moisture can affect camera performance.

Signs your rear camera may need repair include:

• Blurry photos
• Black camera screen
• Camera app freezing
• Autofocus not working
• Camera shaking or vibrating
• Flash not functioning
• Lens cracked or scratched
• Unable to switch between lenses

A complete inspection ensures the issue is correctly identified before any camera components are replaced.

Front Camera Problems

The front camera is essential for selfies, video calls, FaceTime, and Face ID. Damage to the front camera assembly can impact several functions simultaneously.

Common symptoms include:

• Selfie camera not opening
• Blurry front camera
• Black screen when switching cameras
• FaceTime camera failure
• Portrait mode is not working
• Front camera flickering
• Distorted image quality

Our technicians carefully inspect the camera module and connector assembly to determine whether repair or replacement is the best solution.

Speaker and Audio Repairs

Audio problems can make everyday phone use frustrating. Whether you’re making calls, listening to music, or watching videos, clear sound is essential.

Common speaker issues include:

• No sound during calls
• Crackling speaker
• Low speaker volume
• Loudspeaker not working
• Distorted audio
• Earpiece failure
• The speaker stopped working after water damage

Technicians inspect the speaker modules, audio circuits, connectors, and logic board components before recommending repairs.

Microphone Repair

If callers cannot hear you clearly, the issue may involve one or more of the iPhone X’s microphones.

Typical microphone symptoms include:

• Voice cutting out during calls
• Siri not responding
• Poor voice recordings
• Muffled sound
• No audio in videos
• The microphone is not working after water exposure

Professional diagnostics help determine whether the fault lies in the microphone assembly, charging port flex, or motherboard.

Charging IC Repair

When replacing the charging port does not solve charging issues, the charging integrated circuit (IC) may be damaged.

Symptoms include:

• Phone refuses to charge
• Charging stops unexpectedly
• Battery percentage fluctuates
• Phone heats excessively while charging
• Charging cable detected intermittently

Repairing the charging IC requires advanced microsoldering equipment and experience with board-level electronics.

Power Management IC (PMIC) Repair

The Power Management Integrated Circuit controls voltage distribution throughout the iPhone X. If it becomes damaged, the device may behave unpredictably.

Possible symptoms include:

• Phone won’t turn on
• Random shutdowns
• Infinite reboot loop
• The battery drains unusually fast
• Device overheats
• Charging problems

A detailed board inspection helps determine whether the PMIC or related circuits require repair.

Boot Loop and Apple Logo Issues

One of the most common motherboard-related problems is an iPhone X that remains stuck on the Apple logo.

Possible causes include:

• Corrupted software
• Failed update
• Faulty NAND storage
• Battery issues
• Charging circuit failure
• Logic board damage
• Water damage
• Damaged internal flex cables

Rather than immediately replacing parts, technicians perform diagnostic testing to isolate the exact cause of the boot failure.

No Power Repair

An iPhone X that shows no signs of life doesn’t always have a dead battery. The fault could originate from several internal components.

Common causes include:

• Blown motherboard components
• Short circuits
• Water damage
• Power IC failure
• Charging IC faults
• Damaged battery connector
• Logic board corrosion

Using professional diagnostic equipment, technicians measure voltage and current to accurately locate the fault.

Advanced Microsoldering Technology

Unlike standard mobile phone repairs, microsoldering focuses on repairing tiny electronic components directly on the motherboard. This process requires specialized tools and years of experience.

Our repair process includes:

• High-magnification microscope inspection
• Precision hot air rework stations
• Professional soldering equipment
• Thermal imaging diagnostics
• Board-level voltage testing
• Ultrasonic cleaning for water-damaged boards
• Micro-jumper wire repairs
• IC replacement using precision alignment tools

These advanced techniques make it possible to repair many devices that might otherwise be considered beyond repair.

Insert an image here showing a technician performing microsoldering on an iPhone X logic board using a microscope and precision soldering tools.

Why Professional Diagnostics Matter

Replacing parts without confirming the actual fault can waste time and money. For example, a phone that won’t charge may have a damaged charging IC instead of a faulty charging port, while a black screen could be caused by motherboard damage rather than a broken display.

Professional diagnostics help:

• Identify the root cause of the issue.
• Avoid unnecessary component replacement.
• Reduce overall repair costs.
• Increase the likelihood of a successful repair.
• Protect important data stored on the device.
• Improve long-term reliability after repair.

At Microsoldering Repairs, every iPhone X undergoes a thorough inspection before any repair work begins, ensuring that customers receive the most appropriate and cost-effective solution.

Network Signal Problems

A weak or missing mobile network can make your iPhone X difficult or impossible to use for calls, messages, and mobile data. While carrier outages or SIM card problems can cause signal issues, others stem from damaged internal hardware.

Common network issues include:

• No Service displayed on the screen
• Searching for the network continuously
• SIM card not detected
• Weak mobile signal
• Frequent call drops
• Mobile data is not working
• Unable to activate the device
• Baseband errors

Our technicians perform detailed diagnostics to determine whether the SIM tray, antenna, baseband circuitry, or logic board causes the issue. Component-level repairs can often restore reliable network connectivity without replacing the entire motherboard.

Wi-Fi and Bluetooth Repair

Wireless connectivity is essential for browsing the internet, transferring files, and connecting accessories. If Wi-Fi or Bluetooth stops working, the problem may involve software, antenna connections, or motherboard components.

Signs of wireless connectivity problems include: The

• Wi-Fi button is greyed out
• Bluetooth will not turn on
• Weak Wi-Fi signal
• Frequent disconnections
• Unable to pair wireless devices
• Slow wireless performance
• Connection drops unexpectedly

A professional inspection helps identify whether the issue is related to the antenna system, wireless IC, or other internal circuits.

Data Recovery from Damaged iPhone X Devices

Most customers are concerned about recovering important data, such as family photos, contacts, business documents, and personal videos. Even when an iPhone X cannot power on, professional board-level repair may make data recovery possible.

Situations where data recovery may be possible include:

• Water-damaged devices
• Phones stuck on the Apple logo
• No power condition
• Motherboard damage
• Charging failures
• System crashes
• Accidental physical damage

Whenever possible, technicians prioritize restoring access to valuable data before carrying out permanent hardware repairs.

Back Glass Replacement

The iPhone X features a glass back that supports wireless charging and gives the phone a premium appearance. Unfortunately, the rear glass can crack after accidental drops.

Common back glass problems include:

• Cracked rear glass
• Sharp broken edges
• Cosmetic damage
• Wireless charging issues after impact
• Moisture entering through damaged glass

Professional replacement restores the device’s appearance while helping to protect internal components from dust and moisture.

Button Repairs

Physical buttons wear out over time and may stop responding due to accidental damage, dirt, or exposure to liquid.

Repairs are available for:

• Volume buttons
• Silent switch
• Power button
• Side button
• Button flex cables
• Internal connectors

Every repair includes testing to ensure smooth operation after installation.

Vibration Motor Repair

If your phone no longer vibrates for calls or notifications, the Taptic Engine may require repair or replacement.

Symptoms include:

• No vibration
• Weak vibration feedback
• Irregular vibration
• Haptic feedback is not working
• Silent mode vibration failure

Technicians inspect both the vibration motor and the supporting motherboard circuits before recommending repairs.

Preventive Maintenance Tips for Your iPhone X

Preventive maintenance helps reduce the risk of expensive repairs and extends the life of your device.

Follow these practical tips:

• Use a high-quality protective case.
• Install a tempered glass screen protector.
• Keep the charging port clean.
• Avoid exposing the phone to water or excessive humidity.
• Use certified charging cables and adapters.
• Do not leave the phone in extreme heat or direct sunlight.
• Keep iOS updated to the latest stable version.
• Avoid dropping the phone on hard surfaces.
• Replace a weak battery before it begins affecting other components.
• Back up your important data regularly.

Simple habits can significantly improve the long-term performance and reliability of your iPhone X.

Why Choose Microsoldering Repairs?

Finding a trusted repair service is just as important as fixing the device itself. At Microsoldering Repairs, we focus on accurate diagnostics, quality artistry, and transparent service for customers in Rawalpindi and Islamabad.

Reasons customers choose us include:

• Experienced technicians trained in board-level repairs
• Advanced microsoldering equipment
• Professional diagnostic procedures
• High-quality replacement parts
• Careful handling of every device
• Fast turnaround on many common repairs
• Transparent repair recommendations
• Competitive pricing
• Friendly customer support
• Commitment to customer satisfaction

Whether your iPhone X needs a screen or battery replacement, charging repair, Face ID repair, or an advanced motherboard repair, our team is equipped to deliver reliable solutions.

Insert an image here showing a successfully repaired iPhone X being tested by a technician, with diagnostic equipment visible in the background. This image works well before the conclusion section.

Serving Rawalpindi & Islamabad

We proudly provide professional iPhone X repair services for customers throughout Rawalpindi, Islamabad, and surrounding areas. Whether you’re dealing with accidental damage, hardware failure, or software-related issues, our experienced technicians are ready to help.

Our location makes it convenient for customers from:

• Saddar Rawalpindi
• Committee Chowk
• Commercial Market
• Satellite Town
• Bahria Town
• DHA Islamabad
• Blue Area
• G-8
• G-9
• G-10
• F-6
• F-7
• F-10
• I-8
• Chaklala
• Westridge
• Adyala Road
• Peshawar Road
• Airport Housing Society

No matter where you’re located in Rawalpindi or Islamabad, you can visit us for professional diagnostics and dependable iPhone X repairs.

Visit Us Today

If you’re searching online for How To Fix an iPhone X at Microsoldering, professional diagnostics and expert repairs can help restore your device safely and efficiently. From cracked screens and battery replacements to complex logic board repairs, every repair begins with identifying the true source of the problem.

FAQs

Contact Microsoldering Repairs

If you are searching for How To Fix an iPhone X at Microsoldering in Rawalpindi or Islamabad, visit our repair center for expert diagnostics and reliable repair services.

Microsoldering Repairs

Address:
1st Floor, Shabaz Plaza, Bank Road, Saddar, Rawalpindi

Phone / WhatsApp: 03108999929

Our experienced technicians are ready to diagnose and repair your iPhone X using professional tools and advanced microsoldering techniques.

Final Thoughts

The iPhone X remains a powerful smartphone, and many hardware issues can be successfully repaired without replacing the device. Whether you’re dealing with a cracked OLED display, battery degradation, charging problems, Face ID failure, water damage, or a complex logic board fault, professional diagnostics are the key to an effective repair.

At Microsoldering Repairs, we proudly serve customers across Rawalpindi and Islamabad, providing reliable iPhone X repair services backed by advanced diagnostic equipment and board-level repair expertise. Our goal is to extend your device, protect your valuable data, and deliver dependable repair solutions that restore your iPhone X to optimal performance.